Effects of Synthesis Conditions on the Formation of Si-Substituted Alpha Tricalcium Phosphates

Powders of α-TCP containing various amounts of silicon were synthesized by two different methods: Wet chemical precipitation and solid-state synthesis. The obtained powders were then physico–chemically studied using different methods: Scanning and transmission electron microscopy (TEM and SEM), energy-dispersive X-ray spectroscopy (EDS), powder X-ray diffractometry (PXRD), infrared and Raman spectroscopies (FT-IR and R), and solid-state nuclear magnetic resonance (ssNMR). The study showed that the method of synthesis affects the morphology of the obtained particles, the homogeneity of crystalline phase and the efficiency of Si substitution. Solid-state synthesis leads to particles with a low tendency to agglomerate compared to the precipitation method. However, the powders obtained by the solid-state method are less homogeneous and contain a significant amount of other crystalline phase, silicocarnotite (up to 7.33%). Moreover, the microcrystals from this method are more disordered. This might be caused by more efficient substitution of silicate ions: The silicon content of the samples obtained by the solid-state method is almost equal to the nominal values.     

介孔分子硅剂改善茶浓缩膜结构特性应用研究

为有效提高功能性茶浓缩反渗透膜的回收效率和抗污性能,探究了3种介孔分子硅材料(MCM-41、SBA-15和MCFs)对浓缩膜面聚酰胺层聚合形成过程的结构影响。结果表明,添加质量分数0.02%经磺化预处理的MCM-41于间苯二胺水相可接枝酰氯基团,形成的聚酰胺结构层峰谷粗糙跨度仅为220 nm且交联紧致,膜抗拉伸强度增加37.8%;SBA-15和MCFs相膜面峰谷跨度达500~780 nm,横向褶皱和团聚,结构存在孔道塌陷;改性膜在3 h内对茶多酚、茶多糖、茶蛋白即可达到最大浓缩度,减少50%浓缩时间;MCM-41和SBA-15膜长时间运行的浓缩降率仅为2.8%~6.1%,48 h下降率比显示改性膜达标使用时长增加112.5%~137.5%,亲水性和抗污堵能力均大幅提升,可有效满足功能化茶浓缩精度。     

金属有机骨架材料（MOFs）用于气态轻烃的高效分离研究进展

气态轻烃（C₁～C₃）如甲烷、乙烯、丙烯分别作为应用最广的清洁燃料和大宗化工产品，在国民经济中占据重要的地位。然而，在其生产过程中广泛存在着分离与提纯能耗较高的问题。金属有机骨架材料（MOFs）作为第三代新型多孔材料，近年来在轻烃分离领域显示出巨大的应用潜力。本文综述了MOFs用于气态轻烃分离的现状和机理，总结了本文作者课题组针对不同轻烃产物的分离要求，对MOFs进行了精确的孔径调控、配体功能化修饰、构筑吸附位点、调变柔性结构“开口压力”等，实现了多种气态轻烃组分的高效分离。最后，针对低碳烃工业分离过程中存在的关键问题，对MOFs材料的吸附分离机理进行了深入分析，以及MOFs工业化应用所面临的结构稳定性与分离工艺匹配等进行了展望。     

析晶污垢生长影响因素概述

结垢问题存在于各个行业,尤其在油田表现更甚。但材料表面特性对油田采出水中析晶污垢的影响并没有得到太多关注。主要对影响析晶污垢生长的三种主要表面特性因素进行简要综述。     

Effects of three types of modified atmospheric packaging on the physicochemical properties of selected glutinous rice

The effect of modified atmospheric packaging (MAP) on the physicochemical properties of selected glutinous (Thadokkham-8 and Thadokkham-11) rice was studied and compared with a non-glutinous rice (Doongara). The freshly harvested/milled grains were packed in four different MAP conditions viz. control, vacuum, CO₂ and N₂ for 12 months at room temperature (23 ± 1 °C). Gas (N₂ or CO₂) was flushed in aluminum bags at the pressure of 300 kPa for 3 s and subsequently hermetically sealed. Vacuum packaging was done at −100 kPa. Results showed that ageing induced changes in the starch granules were less prominent in vacuum and/or MAP samples using CO₂ or N₂. Surface analysis showed that control storage significantly reduced the percentage of lipids and increased the percentage of proteins on the surface in all selected varieties. N₂ and CO₂ storage of TDK8 and DG slowed down the shift of properties of macromolecules and maintained the surface starch/proteins/lipids ratios during 6 months of storage. Moreover, the grains stored in vacuum maintained the lipids with lower proportion of proteins exposed to the surface after cooking. N₂ and CO₂ induced increase in pasting temperature but significant reduction in final viscosity when compared to control. The findings correlated well with thermal analysis. The in situ Thermal Mechanical Compression Test (TMCT) device cooking and texture analysis revealed that modified storage slightly slowed the ageing induced changes in the cooking quality and stickiness of glutinous rice. Among all storage conditions used vacuum was relatively the best to maintain the quality of the grain.     

Biodegradability Study of the Biosurfactant Contained in a Crude Extract from Corn Steep Water

Over the last few years, the global biosurfactant market has raised due to the increasing awareness among consumers, for the use of biological or bio-based products. Because of their composition, it can be speculated that these are more biocompatible and more biodegradable than their chemical homologous. However, at the moment, no studies exist in the literature about the biodegradability of biosurfactants. In this work, a biosurfactant contained in a crude extract, obtained from a corn wet-milling industry stream that ferments spontaneously in the presence of lactic acid bacteria, was subjected to a biodegradation study, without addition of external microbial biomass, under different conditions of temperature (5–45 °C), biodegradation time (15–55 days), and pH (5–7). For that, a Box–Behnken factorial design was applied, which allowed to predict the percentage of biodegradation for the biosurfactant contained in the crude extract, between the range of the independent variables selected in the study, obtaining biodegradation values between 3 and 80%. The percentage of biodegradation for the biosurfactant was calculated based on the increase in the surface tension of samples of the crude extract. Furthermore, it was also possible to predict the variation in t_1/2 for the biosurfactant (time to achieve the 50% of biodegradation) under different conditions.     

类富勒烯碳薄膜的结构演变及摩擦学性能研究

通过等离子体增强化学气相沉积技术,以不同沉积时间在硅表面上制备类富勒烯碳薄膜,探究类富勒烯碳薄膜结构演变和摩擦学性能随沉积时间变化规律。利用拉曼光谱和透射电子显微镜,考察类富勒烯碳薄膜微结构和表面形貌随沉积时间的变化。结果表明:碳薄膜内类富勒烯结构含量随沉积时间先增加后保持不变;采用沉积时间为3 h的类富勒烯碳薄膜组成摩擦配伍对,当载荷从8 N增加到14 N时,摩擦因数从0.013降至0.006,即随载荷的增加实现了由低摩擦向超滑的转变。这是因为摩擦诱使类富勒烯碳薄膜发生结构转变,并形成有利于减少摩擦的类球状或外部石墨壳层闭合的纳米颗粒。     

Controlled enzymatic hydrolysis on characteristic and antioxidant properties of soybean protein isolate-maltodextrin conjugates

This study aimed to investigate the effect of limited hydrolysis on conformational and antioxidant properties of soy protein isolate-maltodextrin (SPI-Md) conjugates. Extrinsic fluorescence analysis showed unfolding of the protein molecule and exposure of hydrophobic groups in SPI-Md conjugate hydrolysates. Free amino acid analysis showed that, the contents of hydrophobic amino acids in SPI-Md conjugates increased after hydrolysis. The contents of leucine, isoleucine, phenylalanine increased from 0.32, 0.30 and 0.54 to 1.36, 1.86 and 2.60, respectively, when the hydrolysis degree (DH) gradually increased from 0% to 5.7%. The FT-IR spectrum showed that C = O absorption of the amide group formed by glycosylation continued unabated after limited hydrolysis (DH 2.9%). The glycated SPI products showed good reducing power and superior resistance to lipid oxidation (34%, 12 mg mL^?1), whereas the limit hydrolysates (DH 2.9%) of SPI-Md conjugates showed more ef?cient radical-scavenging capacity (89.5%, at 12 mg mL^?1) and iron-chelation activity (91.3%, at 12 mg mL^?1). Results of this study indicated that, slight enzymatic hydrolysis (DH 0–2.9%) could help partially unfolding the globular structure of SPI-Md conjugates without deteriorating amide bonds and had a positive effect on their antioxidant properties.     

湿法磷酸净化脱砷的研究现状

随着食品、医药及电子行业的不断发展，磷酸及磷酸盐的市场需求量不断增大，并且对磷酸的品质要求也越来越高，尤其是对湿法磷酸中砷杂质的要求，湿法磷酸中砷的含量将直接影响其在磷精细化工领域的应用，因此湿法磷酸中砷的高效、安全去除是亟待解决的一大难题。本文主要对湿法净化磷酸脱砷技术的研究情况进行综述，比较了几种湿法净化磷酸脱砷工艺的优缺点，介绍了较常见的化学沉淀法、结晶法，以及新兴的电沉积法、垂直区域熔融法和微反应器脱砷工艺的应用前景，并指出这些新兴的脱砷工艺将成为今后湿法磷酸的净化脱砷的发展方向，如能解决将这些脱砷工艺在实际中的问题，将会对磷酸工业的发展提供一个更有力的支持。